主要成份：碳化硅细粉、陶瓷微粉、树脂等。
产品描述：本产品为双组份材料，A组份为主剂，外观为灰蓝色膏状；B组份为固化剂，外观为棕黄色液体。A、B组份按比例混合后常温固化。
用 途：（1）作为施卓®的碳化硅耐磨涂层施工后的面涂，能提供光滑美观的表面；
（2）也可作为防腐涂层单独使用，在设备表面形成光滑致密的“釉面”，对恶劣的工况有良好的防护作用。
Main Composition: Silicon carbide fine powder, ceramic micropowder, resin, etc.
Product Description: This product is a two-component material. Component A is the main agent, appearing as a gray-blue paste; Component B is the curing agent, presenting as a brown-yellow liquid. Components A and B are mixed in a specific ratio and cure at room temperature.
Application: (1)Used as a topcoat for SYZO® silicon carbide wear-resistant coatings, providing a smooth and aesthetically pleasing surface.
(2)Can also be used independently as an anti-corrosion coating, forming a smooth and dense "glazed" surface on equipment, offering excellent protection in harsh operating conditions.
优 点：● 形成致密的陶瓷涂层，抗气蚀性能良好；
● 对多种酸碱环境有良好的耐腐蚀性；
● 提供超光滑的低摩擦的表面，对水泵有一定的节能作用；
● 良好的防结垢性能；
● 抗海水腐蚀和海洋生物腐蚀性能优异；
● 操作方便，施工效率高；
● 对金属、石材、陶瓷、橡胶、混凝土等各种基材表面都有优良的粘附性。
Advantages: ● Forms a dense ceramic coating with excellent cavitation erosion resistance;
● Demonstrates strong corrosion resistance against various acids and alkalis;
● Provides an ultra-smooth, low-friction surface, contributing to energy-saving effects in pumps;
● Excellent anti-scaling performance;
● Outstanding resistance to seawater corrosion and marine biofouling;
● Easy to apply with high construction efficiency.
● Superior adhesion to various substrates, including metal, stone, ceramic, rubber, and concrete;
包装规格：
施工步骤：
1、对设备表面进行干燥和打磨，使表面无油、无水、无锈、无垢；
2、混合SYZO-33084的A和B组份，使用毛刷均匀施涂在设备表面；
3、常温固化保养24小时后。
Construction Steps:
1.Dry and polish the equipment surface to ensure it is free of oil, water, rust, and scale.
2.Mix components A and B of SYZO-33084, then apply evenly to the equipment surface using a brush.
3.Allow to cure at room temperature for 24 hours for maintenance.
安全须知：
• 须在通风良好的环境中进行，必须穿戴工作服、口罩、手套、防护眼镜；
• 施工时应避免皮肤直接接触材料。
Safety Precautions:
• Must be used in a well-ventilated environment.
• Wear protective workwear, a mask, gloves, and safety goggles at all times.
• Avoid direct skin contact with the material during application.
注意事项：
• SYZO-33084材料作为防腐涂层单独使用时，建议刷涂2遍。一方面避免气孔和漏点的存在，另一方面增加刷涂厚度，延长防护的寿命。
Precautions:
• When SYZO-33084 material is used as a standalone anti-corrosion coating, it is recommended to apply two coats. This helps eliminate air bubbles and pinholes while also increasing coating thickness, thereby extending the protective lifespan.